Desanderand Desilter: Desander desilter are made with a hydrocyclone and a
cyclone underflow handling and recycling of drilling fluids shale shaker small
fine mesh composed. Drilling desander 30-90μm used to remove solid particles;
desilter used to remove the 10-30μm solid particles. Carve cyclone and the
cyclone particle size D50 is not only related to the size of the structure, but
also with the drilling fluid density, density and pressure of the liquid inlet.Drilling
desander shale shaker should be used as the second stage solid phase after
removal of some equipment, and desilter should be used as the third stage
solid-phase removal equipment.
In order to meet the requirements of handling all of
the drilling fluid , drilling fluid and desilter desander must be made up of
several components cyclone cone . In order to ensure normal operation cyclone .
Inlet pressure must be maintained at 0.25 --- 0.35MPa this range. Desilter
swirl cone because many long pipeline , the inlet pressure should be whichever
is greater ; drilling desander less due to cyclone cones , pipe sections, the
inlet pressure is due , whichever is smaller . Inlet pressure depends on the
size drilling sand pump matching is reasonable, therefore drilling sand pump
selection is critical, usually 40mH2O drilling sand pump head around with the
drilling fluid displacement and division desander mud is equal to the amount of
the calibration process , you can meet the requirements.
Meanwhile, in the
selection of drilling fluids and desilter desander must take into consideration
the maximum displacement of drilling pump , with its reach a reasonable match .
Both devices use the time , no strict restrictions , usually in shallow
stratigraphic drilling and soft formations , drilling cuttings large particles
content is high, the two must be used simultaneously ; at drilling depth strata
and hard strata , if with fine mesh shaker can be used directly in addition to
handle drilling mud , which have little impact on the quality of drilling fluid
purification , and very
economical.
In the end,Welcome everyone to visit the professional manufacturer which is the leading company for the solids control equipment in china.
Thanks All !!
Workover Rig is known as the Workover the different types of rigs include the offshore and onshore Rig that range from 150 HP to 1000 HP. Workover rigs have a surface depth that is equipped with diesel engines and transmissions and is available from 8000 ft to 30000 ft. Workover rigs contain a full line of drilling packages. There are skid mounted drilling rigs and the ones that are trailer mounted. Workover skid mounted drilling rigs incorporate the diesel electric AC/VFD or the DC/SCR drive rigs, mechanical drive rigs and the combination drive Rig that ranges from 1000 horse power to 6000 horse power; while the trailer mounted Rig ranges from 450 horse power to 1000 horse power.
Work over drilling rig mud system is also one kind of solids control system .The workover rig mud system is usually contaiind shale shaker, mud cleaner, decanter centrifuge, and mud tank. BW Solids Control is professional at this kind of mud system. BW Exported 5 Sets XJ550HP workover rig mud system to Indonesia, 4 Sets Workover rig mud system to Mexico. 2 Set to Thailand. BW Solids Control can supply all the equipments customized. Whatever your requirements. BW is able to design and manufacture the mud system as per your detailed requirement.
Benefits of BW Workover rig mud system
(1)Customized Design Equipment: Only for customers, we produced which you need!!!
(2)Simplicity and Useful: Simplicity is the essence of BW Solids Control Co.,Ltd.
(3)User Friendly: Very easy and safe to use all the solids control equipments.
(4)Environment Friendly: Be friendly to the environment is very important in drilling operation.
----The End--
Allen Lee
Brightway solids control Ltd
www.bwwell.com
www.bwsolidscontrol.com
bwsolidscontrol.en.alibaba.com
Skype:roylxh888
Good Attitude, Active Action, Bright future.
